If you are thinking about installing an interior wrap on the walls of your home, you may be wondering how to go about it. This step-by-step guide will teach you the process from pre-installation to repairing a tear. Read on for tips to avoid making a costly mistake. Using capped fasteners will ensure the wall graphics will look good after installation. If you don’t have the time to hire a professional, you can easily install a wrap yourself.
Check the testing results
One of the biggest problems with cheap house wraps is their inability to hold water. A house wrap should be able to withstand water ponding and hydrostatic pressure, so you should check the testing results to see how durable they are. You should also check the UV exposure rating, which is very important if your house wrap lasts for a long time. Then, you can buy a wrap that offers you the best protection against the elements.
Before installing interior wrap, prepare the walls by tapering everything that will penetrate the walls, including windows and doors. Make sure to tape as carefully as possible. It is important to tape pipes, which can also be a source of leaks. The house wrap should not be cut out of window openings, as this could cause an unsightly wrinkle. If you can’t tape things, try using regular house wrap tape.
Using capped fasteners
When installing interior wrap on a home wall, you should use capped fasteners. Most manufacturers use these because they are more secure than staples and prevent the material from blowing around. Also, capped fasteners are not as expensive as staples, but they take a little more time. But they’re worth the effort because they keep the interior wrap in place.
Repairing a tear in a house wrap
Whether it’s a tear in the middle of the wrap or a large hole in the roof, you will need to repair a tear in a house wrap to prevent water and air leaks. A house wrap can be obtained from your friends involved in home building, remodeling contractors, or home builders. Once you’ve obtained a piece of house wrap, the next step is to apply it to the tear.